- 相關推薦
Experimental study on full-scale steel beam-to-column moment connections
Ten full-scale steel beam-to-column moment connections used in moment-resisting frames (MRFs) were tested to study the failure process, failure mode, strength and plastic rotation capacity. The specimens include one traditional welded flange-bolted web connection, one traditional fully welded connection, four beam flange strengthened connections,three beam flange weakened connections, and one through-diaphragm connection. The test results show that the connections with flange cover plates or with partly cut beam flanges satisfy the beam plastic rotation demand for ductile MRFs. From the measured stress profiles along the beam flange and beam web depth, the mechanics of brittle fracture at the end of the beam is discussed. Design recommendations for steel beam-to-column moment connections are proposed.
作 者： Qian Jiaru Yu Haiqun Yan Feng Dong Hai Li Jianhua Liu Yueming 作者單位： Qian Jiaru,Yan Feng(Department of Civil Engineering, Key Laboratory for Structural Engineering and Vibration of Ministry of Education, Tsinghua University, Beijing 100084, China)Yu Haiqun,Dong Hai,Li Jianhua,Liu Yueming(Beijing Urban Engineering Architecture Design & Research Institute, Beijing 100037, China)
刊 名： 地震工程與工程振動（英文版） SCI 英文刊名： EARTHQUAKE ENGINEERING AND ENGINEERING VIBRATION 年，卷(期)： 2005 4(2) 分類號： P315 關鍵詞： steel beam-to-colunm moment connection ductility plastic rotational experiment study【Experimental study on full-scale ste】相關文章：
Experimental study on Cr(Ⅵ) reduction by Pseudomonas aeruginosa04-25
Experimental study on the simultaneous desulfurization and denitrification by duct injection04-25
Experimental study on the interaction of fine water mist with solid pool fires04-27
My English Study06-09
My study作文（精選20篇）12-06
Recent Study of the Changjiang Fault Zone04-27